Home>Products>Hydraulic pump and pump parts>Hydraulic Gear Pump 705-11-32210
Hydraulic Gear Pump 705-11-32210
category
Hydraulic pump and pump parts
Hydraulic Gear Pump 705-11-32210 SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Hydraulic Gear Pump 705-11-32210 Technical information
- 1.25 in
- Straight w/ Key
- 4535VQ
- 1 15/16 in
- Buna-N
- 2200
- N/A
- SAE C, 2 Bolt
- Single Shaft Seal
- N/A
- 2200
- 2200
- N/A
- 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm
- N/A
- N/A
- N/A
- N/A
- N/A
- 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm
- 4535VQ60A30-1AA20
- 3000
- 2500
- 45
- 90
- w/o Integral Valves
- Outlet Opposite Inlet
- Outlet Opposite Inlet
- 1 1/4 in Flange
- 1 1/2 in Flange
- 5.96
- 11.8
Hydraulic Gear Pump 705-11-32210 Products and services
Hydraulic Pump Spare Parts Retainer Plate 708-2L-33350 for Komatsu PC200-8 | Spline Description:118.0 LB; Shaft Seal Type:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Manufacturer Part No.:4535VQ60A30-1AA20; Displacement Shaft End (cu in/revolution):4; Shaft End Pressure [Max:Flange; Minor Diameter [Max:5/16 in; Pump Series:Standard Pilot; Major Diameter [Min:1.25 in; Pilot Type:Straight w/ Key; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ60A30-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:45; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):5.96; Displacement Shaft End (cu in/revolution):11.8; |
gear pump 4181700 used for HITACHI EX220-1 | Displacement Shaft End (cu in/revolution):118.0 LB; Major Diameter [Max:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Cover End RPM [Max:4535VQ60A30-1AA20; Shaft Key:4; Pressure Port Size, Cover End:Flange; Minor Diameter [Min:5/16 in; Spline Description:Standard Pilot; Port Type:1.25 in; Controlled Flow Rate:Straight w/ Key; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ60A30-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:45; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):5.96; Displacement Shaft End (cu in/revolution):11.8; |
excavator swing motor parts for Kawasaki M2X210 EX270 | Shaft End Flow @ RPM:118.0 LB; Port Orientation - Cover End:Flange Mount; Integral Valve Configuration:Right Hand (CW); Pilot Type:4535VQ60A30-1AA20; Cover End Flow @ RPM:4; Shaft Dia.:Flange; Minor Diameter [Min:5/16 in; Manufacturer Part No.:Standard Pilot; Minor Diameter [Max:1.25 in; Major Diameter [Min:Straight w/ Key; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ60A30-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:45; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):5.96; Displacement Shaft End (cu in/revolution):11.8; |
SAA4D95LE fuel injector for KOMATSU PC70-8 | Mounting Flange:118.0 LB; Minor Diameter [Min:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Cover End RPM [Max:4535VQ60A30-1AA20; Weight:4; Displacement Cover End (cu in/revolution):Flange; Pressure Port Size, Shaft End:5/16 in; Manufacturer Part No.:Standard Pilot; Model No.:1.25 in; Cover End Pressure [Max:Straight w/ Key; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ60A30-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:45; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):5.96; Displacement Shaft End (cu in/revolution):11.8; |
Hydraulic Gear Pump 705-11-40100 | Max. RPM [Max:118.0 LB; Pressure Port Size, Shaft End:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Seal Material:4535VQ60A30-1AA20; Model No.:4; Cover End Flow @ RPM:Flange; Minor Diameter:5/16 in; Mounting:Standard Pilot; Shaft End Flow @ RPM:1.25 in; Pressure Port Size, Cover End:Straight w/ Key; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ60A30-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:45; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):5.96; Displacement Shaft End (cu in/revolution):11.8; |
Hydraulic Gear Pump 705-51-20430 | GPM @ 1,800 rpm, Shaft End:118.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Model No.:Right Hand (CW); Port Orientation - Shaft End:4535VQ60A30-1AA20; Shaft Type:4; Shaft End RPM [Max:Flange; Major Diameter [Min:5/16 in; Seal Material:Standard Pilot; Spline Description:1.25 in; Shaft Dia.:Straight w/ Key; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ60A30-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:45; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):5.96; Displacement Shaft End (cu in/revolution):11.8; |
Excavator PC450-8 PC400-8 Spare Parts 06000-23124 BEARING Top Quality | Pilot Type:118.0 LB; Port Orientation - Cover End:Flange Mount; Minor Diameter [Max:Right Hand (CW); Manufacturer Part No.:4535VQ60A30-1AA20; Cover End Pressure [Max:4; Minor Diameter [Min:Flange; Port Size:5/16 in; Port Type:Standard Pilot; Minor Diameter:1.25 in; Controlled Flow Rate:Straight w/ Key; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ60A30-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:45; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):5.96; Displacement Shaft End (cu in/revolution):11.8; |
2015 Hot sale popular and attractive mini toy excavator Excavator | Mounting Flange:118.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Shaft Type:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:4535VQ60A30-1AA20; Shaft End Pressure [Max:4; Shaft Length:Flange; Shaft Dia.:5/16 in; Manufacturer Part No.:Standard Pilot; Seal Material:1.25 in; Port Type:Straight w/ Key; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ60A30-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:45; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):5.96; Displacement Shaft End (cu in/revolution):11.8; |
excavator final drive parts GM17 PC120-3 for Nabtesco | Cover End RPM [Max:118.0 LB; Shaft Length:Flange Mount; Integral Valve Configuration:Right Hand (CW); Shaft Seal Type:4535VQ60A30-1AA20; Pump Series:4; Minor Diameter [Max:Flange; Port Type:5/16 in; Shaft End RPM [Max:Standard Pilot; Cover End Pressure [Max:1.25 in; Weight:Straight w/ Key; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ60A30-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:45; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):5.96; Displacement Shaft End (cu in/revolution):11.8; |
High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC210-7/PC210LC-7 | Shaft End Flow @ RPM:118.0 LB; Major Diameter [Min:Flange Mount; Model No.:Right Hand (CW); Minor Diameter [Max:4535VQ60A30-1AA20; Shaft Dia.:4; Shaft Seal Type:Flange; Pressure Port Size, Cover End:5/16 in; Cover End Pressure [Max:Standard Pilot; Integral Valve Configuration:1.25 in; Mounting Flange:Straight w/ Key; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ60A30-1AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:45; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):5.96; Displacement Shaft End (cu in/revolution):11.8; |
Hydraulic Gear Pump 705-11-32210 Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
Hydraulic Gear Pump 705-11-32210 Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Hydraulic pump and pump parts CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump