Home>Products>Hydraulic pump and pump parts>Hydraulic Gear Pump 705-56-43010
Hydraulic Gear Pump 705-56-43010
category
Hydraulic pump and pump parts
Hydraulic Gear Pump 705-56-43010 SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Hydraulic Gear Pump 705-56-43010 Technical information
- 0.875 in
- 13 Tooth Splined
- 2520VQ
- 1 3/8 in
- Buna-N
- 2500
- 0.715 in
- SAE B, 2 Bolt
- Single Shaft Seal
- 16/32
- 2700
- 2500
- N/A
- 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm
- 0.873 in
- 0.872 in
- N/A
- N/A
- N/A
- 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm
- 2520VQ17A8-11DC20
- 3000
- 3000
- 12
- 25.5
- w/o Integral Valves
- Outlet 45° CW from Inlet
- Outlet 90° CW from Inlet
- 3/4 in Flange
- 1 in Flange
- 1.67
- 3.37
Hydraulic Gear Pump 705-56-43010 Products and services
High Quality Air Compressor 20Y-979-6121 for Komatsu Excavator PC1250-7 PC2000-8 | Port Orientation - Shaft End:45.0 LB; Cover End RPM [Max:Flange Mount; Shaft Dia.:Right Hand (CW); Port Orientation - Cover End:2520VQ17A8-11DC20; Minor Diameter [Max:2 1/2; Minor Diameter [Min:Flange; Relief Valve Setting:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Weight:0.875 in; Max. RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37; |
Hydraulic Pump Spare Parts Valve Plate 708-3S-13230 for Komatsu PC50MR-2 PC55MR-2 | GPM @ 1,800 rpm, Cover End:45.0 LB; Max. RPM [Max:Flange Mount; Major Diameter [Min:Right Hand (CW); Spline Description:2520VQ17A8-11DC20; Controlled Flow Rate:2 1/2; Integral Valve Configuration:Flange; Minor Diameter:N/A; Shaft Type:Standard Pilot; GPM @ 1,800 rpm, Shaft End:0.875 in; Port Size:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37; |
6D15-T fuel injector for CAT E240 | Max. RPM [Max:45.0 LB; Major Diameter [Max:Flange Mount; Minor Diameter:Right Hand (CW); Displacement Cover End (cu in/revolution):2520VQ17A8-11DC20; Cover End Pressure [Max:2 1/2; Port Type:Flange; Controlled Flow Rate:N/A; Port Size:Standard Pilot; Shaft End Pressure [Max:0.875 in; Model No.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37; |
Hydraulic Gear Pump 705-11-40100 | Pilot Type:45.0 LB; Weight:Flange Mount; Shaft Type:Right Hand (CW); GPM @ 1,800 rpm, Cover End:2520VQ17A8-11DC20; Spline Description:2 1/2; Controlled Flow Rate:Flange; Max. RPM [Max:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Port Orientation - Cover End:0.875 in; Port Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37; |
Hot sale For Sumitomo S200-3 turbocharger model RHG6 Part NO. 114400-3890 turbocharger | Minor Diameter [Max:45.0 LB; Seal Material:Flange Mount; Major Diameter [Min:Right Hand (CW); Shaft Dia.:2520VQ17A8-11DC20; Shaft End Pressure [Max:2 1/2; Minor Diameter [Min:Flange; Manufacturer Part No.:N/A; Port Orientation - Shaft End:Standard Pilot; Shaft End Flow @ RPM:0.875 in; Shaft Seal Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37; |
Wholesale Price 6505-61-5030 Turbocharger for Komatsu PC200-7 PC300 PC400 PC650 PC750 PC800 | Mounting:45.0 LB; Model No.:Flange Mount; Weight:Right Hand (CW); Major Diameter [Max:2520VQ17A8-11DC20; Relief Valve Setting:2 1/2; Seal Material:Flange; Cover End Flow @ RPM:N/A; Port Type:Standard Pilot; Manufacturer Part No.:0.875 in; Shaft Key:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37; |
Hydraulic Gear Pump 705-41-07180 | Shaft End RPM [Max:45.0 LB; Max. RPM [Max:Flange Mount; Cover End RPM [Max:Right Hand (CW); Shaft Seal Type:2520VQ17A8-11DC20; Minor Diameter [Min:2 1/2; Port Orientation - Cover End:Flange; Port Orientation - Shaft End:N/A; Port Type:Standard Pilot; Pilot Type:0.875 in; Shaft End Pressure [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37; |
Hot Sale Engine Cylinder head 4N3714 for CATERPILLAR 3406/3408/3412 | Pressure Port Size, Cover End:45.0 LB; Shaft End Flow @ RPM:Flange Mount; Seal Material:Right Hand (CW); Port Orientation - Shaft End:2520VQ17A8-11DC20; Minor Diameter:2 1/2; Integral Valve Configuration:Flange; Shaft Length:N/A; Controlled Flow Rate:Standard Pilot; Major Diameter [Min:0.875 in; Shaft Dia.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37; |
Hydraulic Pump Spare Parts piston shoe 708-2L-33310 for Komatsu PC110/PC130-7 | Shaft End RPM [Max:45.0 LB; Spline Description:Flange Mount; Shaft Type:Right Hand (CW); Port Size:2520VQ17A8-11DC20; Rotation:2 1/2; Port Orientation - Shaft End:Flange; Mounting Flange:N/A; Cover End Pressure [Max:Standard Pilot; Minor Diameter:0.875 in; Shaft End Pressure [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37; |
excavator 4D120 engine parts for Komatsue | Major Diameter [Max:45.0 LB; Controlled Flow Rate:Flange Mount; Cover End RPM [Max:Right Hand (CW); Port Type:2520VQ17A8-11DC20; Minor Diameter:2 1/2; Spline Description:Flange; Displacement Cover End (cu in/revolution):N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Pilot Type:0.875 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ17A8-11DC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.67; Displacement Shaft End (cu in/revolution):3.37; |
Hydraulic Gear Pump 705-56-43010 Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
Hydraulic Gear Pump 705-56-43010 Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Hydraulic pump and pump parts CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump