Home>Products>Hydraulic pump and pump parts>Hydraulic Gear Pump 705-55-33080
Hydraulic Gear Pump 705-55-33080
category
Hydraulic pump and pump parts
Hydraulic Gear Pump 705-55-33080 SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Hydraulic Gear Pump 705-55-33080 Technical information
- 0.875 in
- Straight w/ Key
- V2010
- 2 5/16 in
- Double
- Buna-N
- 2500
- N/A
- SAE B, 2 Bolt
- Single Shaft Seal
- N/A
- 3000
- 2500
- N/A
- 4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm
- N/A
- N/A
- N/A
- N/A
- N/A
- 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
- 2500
- 2500
- 6
- 16.5
- N/A
- Outlet 135° CCW from Inlet
- Outlet Opposite Inlet
- 1/2 in SAE O-Ring
- 3/4 in SAE O-Ring
- 0.8
- 2.2
Hydraulic Gear Pump 705-55-33080 Products and services
Hot Sale Kids Excavator for children play outdoor | Integral Valve Configuration:30.0 LB; Cover End Flow @ RPM:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Manufacturer Part No.:V2010-1F11S4S-1AA12; Shaft End RPM [Max:1.5; Minor Diameter:Flange; Cover End Pressure [Max:3/16 in; Pressure Port Size, Cover End:N/A; Pump Series:0.875 in; Cover End RPM [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.2; |
Factory Price Lift/dump/steering pump 705-56-36040 For Komatsu WA250-6 | Shaft Dia.:30.0 LB; Model No.:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Controlled Flow Rate:V2010-1F11S4S-1AA12; Pump Series:1.5; Minor Diameter [Max:Flange; Integral Valve Configuration:3/16 in; Major Diameter [Min:N/A; Minor Diameter [Min:0.875 in; Mounting:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.2; |
hydraulic pump A11VO95LRDS 10R-NZD12KO1 A11VLO 95 bomba hidraulica | Cover End Pressure [Max:30.0 LB; Relief Valve Setting:Flange Mount; Mounting Flange:Right Hand (CW); Spline Description:V2010-1F11S4S-1AA12; GPM @ 1,800 rpm, Shaft End:1.5; Model No.:Flange; Pressure Port Size, Shaft End:3/16 in; Port Size:N/A; Max. RPM [Max:0.875 in; Pump Series:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.2; |
Hydraulic Gear Pump 705-41-02320 | Controlled Flow Rate:30.0 LB; Mounting:Flange Mount; Model No.:Right Hand (CW); Integral Valve Configuration:V2010-1F11S4S-1AA12; Major Diameter [Min:1.5; Port Orientation - Cover End:Flange; Relief Valve Setting:3/16 in; Shaft Key:N/A; Minor Diameter [Min:0.875 in; Rotation:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.2; |
Hydraulic Gear Pump 705-56-26030 | Shaft Type:30.0 LB; Minor Diameter:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Major Diameter [Min:V2010-1F11S4S-1AA12; Minor Diameter [Min:1.5; Shaft Seal Type:Flange; Relief Valve Setting:3/16 in; Cover End Pressure [Max:N/A; Shaft End RPM [Max:0.875 in; Shaft End Flow @ RPM:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.2; |
Excavator Hyundai R290-3 slewing bearing ,slewing ring bearing | GPM @ 1,800 rpm, Cover End:30.0 LB; Relief Valve Setting:Flange Mount; Weight:Right Hand (CW); Shaft Type:V2010-1F11S4S-1AA12; Shaft Seal Type:1.5; Spline Description:Flange; Mounting:3/16 in; Minor Diameter:N/A; Model No.:0.875 in; Shaft End Pressure [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.2; |
Fixed displacement piston pump A2F45R1P3 piston motor | Displacement Cover End (cu in/revolution):30.0 LB; Controlled Flow Rate:Flange Mount; Max. RPM [Max:Right Hand (CW); Pilot Type:V2010-1F11S4S-1AA12; Manufacturer Part No.:1.5; Model No.:Flange; Shaft End RPM [Max:3/16 in; Pressure Port Size, Shaft End:N/A; Spline Description:0.875 in; Pump Series:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.2; |
Excavator Hitach EX60-1 slewing bearing ,slewing ring bearing | Pressure Port Size, Shaft End:30.0 LB; Max. RPM [Max:Flange Mount; Pump Series:Right Hand (CW); Relief Valve Setting:V2010-1F11S4S-1AA12; Cover End Flow @ RPM:1.5; Shaft Key:Flange; Mounting Flange:3/16 in; Minor Diameter [Max:N/A; Shaft Length:0.875 in; Pressure Port Size, Cover End:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.2; |
Fixed displacement piston pump A2F55 piston motor | Shaft End Flow @ RPM:30.0 LB; Pilot Type:Flange Mount; Controlled Flow Rate:Right Hand (CW); Model No.:V2010-1F11S4S-1AA12; Displacement Cover End (cu in/revolution):1.5; Mounting Flange:Flange; Shaft Dia.:3/16 in; Weight:N/A; Mounting:0.875 in; Seal Material:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.2; |
Excavator Sumitomo SH120-1 slewing bearing ,slewing ring bearing | Cover End Pressure [Max:30.0 LB; Cover End Flow @ RPM:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Pressure Port Size, Shaft End:V2010-1F11S4S-1AA12; Port Orientation - Cover End:1.5; Manufacturer Part No.:Flange; Displacement Cover End (cu in/revolution):3/16 in; GPM @ 1,800 rpm, Shaft End:N/A; Pilot Type:0.875 in; Rotation:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:6; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.8; Displacement Shaft End (cu in/revolution):2.2; |
Hydraulic Gear Pump 705-55-33080 Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
Hydraulic Gear Pump 705-55-33080 Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Hydraulic pump and pump parts CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump