• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Hydraulic pump and pump parts>Competitive price for Hitachi EX200-5-6 excavator pump parts HPV102 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT

  • Competitive price for Hitachi EX200-5-6 excavator pump parts HPV102 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • Competitive price for Hitachi EX200-5-6 excavator pump parts HPV102 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • Competitive price for Hitachi EX200-5-6 excavator pump parts HPV102 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • Competitive price for Hitachi EX200-5-6 excavator pump parts HPV102 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • Competitive price for Hitachi EX200-5-6 excavator pump parts HPV102 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • Competitive price for Hitachi EX200-5-6 excavator pump parts HPV102 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • Competitive price for Hitachi EX200-5-6 excavator pump parts HPV102 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • Competitive price for Hitachi EX200-5-6 excavator pump parts HPV102 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • Competitive price for Hitachi EX200-5-6 excavator pump parts HPV102 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • Competitive price for Hitachi EX200-5-6 excavator pump parts HPV102 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT

Competitive price for Hitachi EX200-5-6 excavator pump parts HPV102 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Competitive price for Hitachi EX200-5-6 excavator pump parts HPV102 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT

category

Hydraulic pump and pump parts

Competitive price for Hitachi EX200-5-6 excavator pump parts HPV102 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Competitive price for Hitachi EX200-5-6 excavator pump parts HPV102 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Technical information

  • 1.25 in
  • 14 Tooth Splined
  • 3520VQ
  • 1 15/16 in
  • Buna-N
  • 2500
  • 1.04 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 2500
  • 2500
  • N/A
  • 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
  • 1.248 in
  • 1.247 in
  • N/A
  • N/A
  • N/A
  • 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm
  • 3520VQ30E11-11CC20
  • 3000
  • 3000
  • 16.5
  • 45
  • w/o Integral Valves
  • Outlet 45° CW from Inlet
  • Outlet Inline w/Inlet
  • 1 1/16 in SAE O-Ring
  • 1 1/4 in Flange
  • 2.22
  • 5.96

Competitive price for Hitachi EX200-5-6 excavator pump parts HPV102 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Products and services

 

Factory price PC300-6 Exhaust muffler Excavator muffler Construction Machinery Parts SilencerMounting Flange:75.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Mounting:Right Hand (CW); Cover End RPM [Max:3520VQ30E11-11CC20; Pressure Port Size, Cover End:3; Spline Description:Flange; Shaft Key:N/A; Shaft End Flow @ RPM:Standard Pilot; Pilot Type:1.25 in; Minor Diameter [Max:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96;
4D31T fuel injector for CAT E110Mounting:75.0 LB; Minor Diameter:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Cover End Pressure [Max:3520VQ30E11-11CC20; Minor Diameter [Min:3; Cover End RPM [Max:Flange; Displacement Shaft End (cu in/revolution):N/A; Shaft Seal Type:Standard Pilot; Shaft Key:1.25 in; GPM @ 1,800 rpm, Shaft End:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96;
Factory price PC200-1 Exhaust muffler Excavator muffler Construction Machinery Parts SilencerPort Orientation - Cover End:75.0 LB; Relief Valve Setting:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Spline Description:3520VQ30E11-11CC20; Shaft Length:3; Cover End RPM [Max:Flange; Major Diameter [Min:N/A; Cover End Pressure [Max:Standard Pilot; Cover End Flow @ RPM:1.25 in; Seal Material:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96;
4TNV94 fuel injector for DOOSAN DH60-7Port Orientation - Cover End:75.0 LB; Port Type:Flange Mount; Controlled Flow Rate:Right Hand (CW); Cover End RPM [Max:3520VQ30E11-11CC20; Shaft Dia.:3; Mounting Flange:Flange; Spline Description:N/A; Max. RPM [Max:Standard Pilot; Shaft Length:1.25 in; Major Diameter [Max:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96;
Hot sale For Hyundai XD300 300-5 turbocharger model HX40 Part NO. 3802651 turbochargerCover End Flow @ RPM:75.0 LB; Pilot Type:Flange Mount; Model No.:Right Hand (CW); Mounting Flange:3520VQ30E11-11CC20; Spline Description:3; Minor Diameter [Min:Flange; Major Diameter [Max:N/A; Shaft Type:Standard Pilot; Rotation:1.25 in; Shaft End Pressure [Max:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96;
Hydraulic Gear Pump 705-11-34100GPM @ 1,800 rpm, Shaft End:75.0 LB; Relief Valve Setting:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Cover End RPM [Max:3520VQ30E11-11CC20; Minor Diameter [Max:3; Rotation:Flange; Weight:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Max. RPM [Max:1.25 in; Port Type:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96;
Hydraulic Pump Spare Parts Retainer Plate 708-2G-13341 for Komatsu PC300-7Major Diameter [Min:75.0 LB; Shaft Key:Flange Mount; Cover End Pressure [Max:Right Hand (CW); GPM @ 1,800 rpm, Cover End:3520VQ30E11-11CC20; Port Size:3; Minor Diameter [Min:Flange; Shaft Length:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Shaft Seal Type:1.25 in; Cover End Flow @ RPM:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96;
Hydraulic Gear Pump 17A-49-11100Minor Diameter [Max:75.0 LB; Minor Diameter:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Shaft Length:3520VQ30E11-11CC20; Displacement Cover End (cu in/revolution):3; Shaft Key:Flange; Pressure Port Size, Shaft End:N/A; Cover End Pressure [Max:Standard Pilot; Max. RPM [Max:1.25 in; Shaft End Pressure [Max:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96;
Hot sale Cart 320B turbocharger model TD06 Part NO. 5I8018 3066T engine turbocharger OEM NO. 49179-02300Minor Diameter [Max:75.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Minor Diameter [Min:Right Hand (CW); Model No.:3520VQ30E11-11CC20; Relief Valve Setting:3; Max. RPM [Max:Flange; Mounting Flange:N/A; Pump Series:Standard Pilot; Integral Valve Configuration:1.25 in; Pressure Port Size, Cover End:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96;
6BB1 fuel injector for HITACHI EX100WShaft End Flow @ RPM:75.0 LB; Cover End Flow @ RPM:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Port Size:3520VQ30E11-11CC20; Pump Series:3; Manufacturer Part No.:Flange; Pilot Type:N/A; Relief Valve Setting:Standard Pilot; Port Orientation - Shaft End:1.25 in; Minor Diameter [Min:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11CC20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):5.96;

 

 

Competitive price for Hitachi EX200-5-6 excavator pump parts HPV102 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Competitive price for Hitachi EX200-5-6 excavator pump parts HPV102 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Hydraulic pump and pump parts CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed Competitive price for Hitachi EX200-5-6 excavator pump parts HPV102 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Also Viewed

  • gear oil pump 6710-51-1001 used for KOMATSU D95S-2
  • gear oil pump 6151-51-1005 used for KOMATSU D85A-21
  • Hydraulic Gear Pump 5M7864
  • gear oil pump 6151-51-1005 used for KOMATSU D85C-21D
  • gear oil pump 6710-51-1001 used for KOMATSU D85P-18
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us