Home>Products>Hydraulic pump and pump parts>gear pump 1262083 used for CAT 320B
gear pump 1262083 used for CAT 320B
category
Hydraulic pump and pump parts
gear pump 1262083 used for CAT 320B SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
gear pump 1262083 used for CAT 320B Technical information
- 2 gpm @ 1200 rpm
- 11
- 0.625 in
- 9 Tooth Splined
- 3 gpm @ 1750 rpm
- V10
- 1 1/4 in
- Single
- SAE-8
- Buna-N
- 4500
- 2500 psi
- 3
- P
- SAE A, 2 Bolt
- S
- 1
- Opposite Inlet Port
- 0.4
- w/o Integral Valves
- 11A
gear pump 1262083 used for CAT 320B Products and services
4D32 fuel injector for CAT E311B | Cover End Pressure [Max:15.0 LB; Cover End Flow @ RPM:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Pressure Port Size, Cover End:2 gal/min @ 1200 rpm; Minor Diameter [Max:1; Pilot Type:NPT; Port Type:N/A; Shaft Key:20; Cover End RPM [Max:2 gpm @ 1200 rpm; GPM @ 1,800 rpm, Cover End:11; Shaft Dia.:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:Opposite Inlet Port; Displacement (in³/rev):0.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11A; |
Hydraulic Gear Pump 705-55-33080 | Model No.:15.0 LB; Cover End RPM [Max:Flange Mount; Seal Material:Right Hand (CW); Cover End Flow @ RPM:2 gal/min @ 1200 rpm; Mounting Flange:1; Shaft End Pressure [Max:NPT; Displacement Cover End (cu in/revolution):N/A; Shaft Seal Type:20; Controlled Flow Rate:2 gpm @ 1200 rpm; Major Diameter [Max:11; Shaft Dia.:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:Opposite Inlet Port; Displacement (in³/rev):0.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11A; |
gear pump 705-12-30010 used for KOMATSU PC400-1 | Controlled Flow Rate:15.0 LB; Shaft Length:Flange Mount; Mounting:Right Hand (CW); Pressure Port Size, Cover End:2 gal/min @ 1200 rpm; Shaft Seal Type:1; Port Size:NPT; Displacement Shaft End (cu in/revolution):N/A; Pressure Port Size, Shaft End:20; Shaft End Pressure [Max:2 gpm @ 1200 rpm; Pilot Type:11; Shaft Dia.:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:Opposite Inlet Port; Displacement (in³/rev):0.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11A; |
Hydraulic Gear Pump 07443-67504 | Port Type:15.0 LB; Major Diameter [Max:Flange Mount; Weight:Right Hand (CW); GPM @ 1,800 rpm, Cover End:2 gal/min @ 1200 rpm; Shaft End Pressure [Max:1; Port Size:NPT; Shaft Seal Type:N/A; Displacement Shaft End (cu in/revolution):20; Minor Diameter [Min:2 gpm @ 1200 rpm; Rotation:11; Shaft Dia.:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:Opposite Inlet Port; Displacement (in³/rev):0.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11A; |
Hot Sale Engine Cylinder Head 201-2180 for CATERPILLAR C-9 | Shaft End RPM [Max:15.0 LB; Shaft Key:Flange Mount; Mounting:Right Hand (CW); Major Diameter [Max:2 gal/min @ 1200 rpm; Displacement Cover End (cu in/revolution):1; Cover End RPM [Max:NPT; Integral Valve Configuration:N/A; Controlled Flow Rate:20; Port Type:2 gpm @ 1200 rpm; Minor Diameter:11; Shaft Dia.:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:Opposite Inlet Port; Displacement (in³/rev):0.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11A; |
Hydraulic Gear Pump 705-52-30360 | Cover End RPM [Max:15.0 LB; Seal Material:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Displacement Shaft End (cu in/revolution):2 gal/min @ 1200 rpm; Minor Diameter [Min:1; Shaft End Flow @ RPM:NPT; GPM @ 1,800 rpm, Shaft End:N/A; Shaft Key:20; Integral Valve Configuration:2 gpm @ 1200 rpm; Weight:11; Shaft Dia.:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:Opposite Inlet Port; Displacement (in³/rev):0.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11A; |
gear oil pump 6620-51-1021 used for KOMATSU D75S-3 | Major Diameter [Min:15.0 LB; Cover End Flow @ RPM:Flange Mount; Model No.:Right Hand (CW); Mounting:2 gal/min @ 1200 rpm; Seal Material:1; Spline Description:NPT; Pilot Type:N/A; Pump Series:20; Displacement Cover End (cu in/revolution):2 gpm @ 1200 rpm; GPM @ 1,800 rpm, Cover End:11; Shaft Dia.:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:Opposite Inlet Port; Displacement (in³/rev):0.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11A; |
Hydraulic Gear Pump 705-56-24080 | Pilot Type:15.0 LB; Cover End Flow @ RPM:Flange Mount; Relief Valve Setting:Right Hand (CW); Shaft End Flow @ RPM:2 gal/min @ 1200 rpm; Controlled Flow Rate:1; Cover End RPM [Max:NPT; Port Orientation - Cover End:N/A; Seal Material:20; Shaft End Pressure [Max:2 gpm @ 1200 rpm; Shaft Seal Type:11; Shaft Dia.:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:Opposite Inlet Port; Displacement (in³/rev):0.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11A; |
Hot Sale Engine Cylinder head 4N3714 for CATERPILLAR 3406/3408/3412 | Minor Diameter:15.0 LB; Manufacturer Part No.:Flange Mount; Minor Diameter [Min:Right Hand (CW); Displacement Shaft End (cu in/revolution):2 gal/min @ 1200 rpm; Shaft Length:1; GPM @ 1,800 rpm, Shaft End:NPT; Pressure Port Size, Shaft End:N/A; Shaft End Pressure [Max:20; Major Diameter [Min:2 gpm @ 1200 rpm; Pump Series:11; Shaft Dia.:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:Opposite Inlet Port; Displacement (in³/rev):0.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11A; |
Hydraulic Gear Pump 705-22-30150 | Port Size:15.0 LB; Pump Series:Flange Mount; Mounting Flange:Right Hand (CW); Displacement Cover End (cu in/revolution):2 gal/min @ 1200 rpm; Spline Description:1; Relief Valve Setting:NPT; Shaft End RPM [Max:N/A; Minor Diameter:20; Minor Diameter [Max:2 gpm @ 1200 rpm; Mounting:11; Shaft Dia.:0.625 in; Shaft Type:9 Tooth Splined; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Configuration:Single; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:Opposite Inlet Port; Displacement (in³/rev):0.4; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:11A; |
gear pump 1262083 used for CAT 320B Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
gear pump 1262083 used for CAT 320B Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Hydraulic pump and pump parts CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump