• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Hydraulic pump and pump parts>Best Quality Retainer For 708-2G-13341 PC300-8 PC350LC-8 WA480-6 WA470-6 WD600-6 PC350LC-8

  • Best Quality Retainer For 708-2G-13341 PC300-8 PC350LC-8 WA480-6 WA470-6 WD600-6 PC350LC-8
  • Best Quality Retainer For 708-2G-13341 PC300-8 PC350LC-8 WA480-6 WA470-6 WD600-6 PC350LC-8
  • Best Quality Retainer For 708-2G-13341 PC300-8 PC350LC-8 WA480-6 WA470-6 WD600-6 PC350LC-8
  • Best Quality Retainer For 708-2G-13341 PC300-8 PC350LC-8 WA480-6 WA470-6 WD600-6 PC350LC-8
  • Best Quality Retainer For 708-2G-13341 PC300-8 PC350LC-8 WA480-6 WA470-6 WD600-6 PC350LC-8
  • Best Quality Retainer For 708-2G-13341 PC300-8 PC350LC-8 WA480-6 WA470-6 WD600-6 PC350LC-8
  • Best Quality Retainer For 708-2G-13341 PC300-8 PC350LC-8 WA480-6 WA470-6 WD600-6 PC350LC-8
  • Best Quality Retainer For 708-2G-13341 PC300-8 PC350LC-8 WA480-6 WA470-6 WD600-6 PC350LC-8
  • Best Quality Retainer For 708-2G-13341 PC300-8 PC350LC-8 WA480-6 WA470-6 WD600-6 PC350LC-8
  • Best Quality Retainer For 708-2G-13341 PC300-8 PC350LC-8 WA480-6 WA470-6 WD600-6 PC350LC-8

Best Quality Retainer For 708-2G-13341 PC300-8 PC350LC-8 WA480-6 WA470-6 WD600-6 PC350LC-8 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Best Quality Retainer For 708-2G-13341 PC300-8 PC350LC-8 WA480-6 WA470-6 WD600-6 PC350LC-8

category

Hydraulic pump and pump parts

Best Quality Retainer For 708-2G-13341 PC300-8 PC350LC-8 WA480-6 WA470-6 WD600-6 PC350LC-8 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Best Quality Retainer For 708-2G-13341 PC300-8 PC350LC-8 WA480-6 WA470-6 WD600-6 PC350LC-8 Technical information

  • 0.875 in
  • Straight w/ Key
  • 2520VQ
  • 1 15/16 in
  • Buna-N
  • 2700
  • N/A
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • N/A
  • 2700
  • 2700
  • N/A
  • 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • N/A
  • 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm
  • 2520VQ12A11-1BB20
  • 3000
  • 3000
  • 16.5
  • 18
  • w/o Integral Valves
  • Outlet 45° CCW from Inlet
  • Outlet 90° CCW from Inlet
  • 3/4 in Flange
  • 1 in Flange
  • 2.22
  • 2.45

Best Quality Retainer For 708-2G-13341 PC300-8 PC350LC-8 WA480-6 WA470-6 WD600-6 PC350LC-8 Products and services

 

Hydraulic Gear Pump 705-11-33100Max. RPM [Max:45.0 LB; Port Size:Flange Mount; Rotation:Right Hand (CW); Shaft Type:2520VQ12A11-1BB20; Seal Material:2 1/2; Displacement Cover End (cu in/revolution):Flange; Shaft Dia.:3/16 in; Mounting Flange:Standard Pilot; Minor Diameter [Min:0.875 in; Pressure Port Size, Cover End:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-1BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):2.45;
Excavator R300-5 slewing bearing ,slewing ring bearing for HyundaiShaft Type:45.0 LB; Pressure Port Size, Shaft End:Flange Mount; Major Diameter [Max:Right Hand (CW); Cover End Flow @ RPM:2520VQ12A11-1BB20; Shaft Key:2 1/2; Controlled Flow Rate:Flange; Port Orientation - Shaft End:3/16 in; Integral Valve Configuration:Standard Pilot; Manufacturer Part No.:0.875 in; Port Type:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-1BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):2.45;
4BD1-T fuel injector for HITACHI EX150Shaft End RPM [Max:45.0 LB; Manufacturer Part No.:Flange Mount; Shaft Seal Type:Right Hand (CW); Mounting Flange:2520VQ12A11-1BB20; Cover End Flow @ RPM:2 1/2; Integral Valve Configuration:Flange; Shaft Dia.:3/16 in; GPM @ 1,800 rpm, Cover End:Standard Pilot; Displacement Cover End (cu in/revolution):0.875 in; Shaft End Pressure [Max:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-1BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):2.45;
S6B-TA fuel injector for CAT E650Displacement Cover End (cu in/revolution):45.0 LB; Shaft End Pressure [Max:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Mounting:2520VQ12A11-1BB20; GPM @ 1,800 rpm, Cover End:2 1/2; Rotation:Flange; Minor Diameter [Min:3/16 in; Integral Valve Configuration:Standard Pilot; Pressure Port Size, Cover End:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-1BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):2.45;
4BG1 fuel injector for HITACHI ZAX120-6Cover End RPM [Max:45.0 LB; Mounting Flange:Flange Mount; Shaft Key:Right Hand (CW); Displacement Cover End (cu in/revolution):2520VQ12A11-1BB20; GPM @ 1,800 rpm, Cover End:2 1/2; Seal Material:Flange; Major Diameter [Min:3/16 in; Pressure Port Size, Shaft End:Standard Pilot; Minor Diameter:0.875 in; Pilot Type:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-1BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):2.45;
Factory price PC200-6 6D95 excavator alternator engine generator 600-821-6190 0-33000-6580Port Type:45.0 LB; Seal Material:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Port Orientation - Shaft End:2520VQ12A11-1BB20; Model No.:2 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Shaft End Flow @ RPM:3/16 in; Cover End Pressure [Max:Standard Pilot; Mounting:0.875 in; Major Diameter [Min:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-1BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):2.45;
Hydraulic Gear Pump 705-52-30360Port Orientation - Shaft End:45.0 LB; Shaft End Pressure [Max:Flange Mount; Shaft Dia.:Right Hand (CW); Spline Description:2520VQ12A11-1BB20; Weight:2 1/2; Shaft Key:Flange; Max. RPM [Max:3/16 in; GPM @ 1,800 rpm, Cover End:Standard Pilot; Manufacturer Part No.:0.875 in; Shaft End RPM [Max:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-1BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):2.45;
Excavator Kobelco SK250-8 slewing bearing ,slewing ring bearingMajor Diameter [Min:45.0 LB; Cover End RPM [Max:Flange Mount; Shaft Dia.:Right Hand (CW); Weight:2520VQ12A11-1BB20; Port Size:2 1/2; GPM @ 1,800 rpm, Cover End:Flange; Manufacturer Part No.:3/16 in; Port Orientation - Shaft End:Standard Pilot; Max. RPM [Max:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-1BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):2.45;
Hot Sale Engine Cylinder Head 8N1188 for CATERPILLAR 3304PCSpline Description:45.0 LB; Port Orientation - Shaft End:Flange Mount; Mounting:Right Hand (CW); Relief Valve Setting:2520VQ12A11-1BB20; Weight:2 1/2; GPM @ 1,800 rpm, Cover End:Flange; Shaft End Flow @ RPM:3/16 in; Cover End Flow @ RPM:Standard Pilot; GPM @ 1,800 rpm, Shaft End:0.875 in; Cover End RPM [Max:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-1BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):2.45;
Hot Sale Engine Cylinder Head 3811985 for CUMMINS K19Mounting Flange:45.0 LB; Cover End Flow @ RPM:Flange Mount; Minor Diameter [Min:Right Hand (CW); Seal Material:2520VQ12A11-1BB20; Weight:2 1/2; Shaft End Flow @ RPM:Flange; Model No.:3/16 in; Manufacturer Part No.:Standard Pilot; Shaft Key:0.875 in; Minor Diameter [Max:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A11-1BB20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):2.45;

 

 

Best Quality Retainer For 708-2G-13341 PC300-8 PC350LC-8 WA480-6 WA470-6 WD600-6 PC350LC-8 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Best Quality Retainer For 708-2G-13341 PC300-8 PC350LC-8 WA480-6 WA470-6 WD600-6 PC350LC-8 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Hydraulic pump and pump parts CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed Best Quality Retainer For 708-2G-13341 PC300-8 PC350LC-8 WA480-6 WA470-6 WD600-6 PC350LC-8 Also Viewed

  • gear oil pump 6710-51-1001 used for KOMATSU D95S-2
  • gear oil pump 6151-51-1005 used for KOMATSU D85A-21
  • Hydraulic Gear Pump 5M7864
  • gear oil pump 6151-51-1005 used for KOMATSU D85C-21D
  • gear oil pump 6710-51-1001 used for KOMATSU D85P-18
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us