Home>Products>Hydraulic pump and pump parts>S6B-TA fuel injector for CAT E650
S6B-TA fuel injector for CAT E650
category
Hydraulic pump and pump parts
S6B-TA fuel injector for CAT E650 SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
S6B-TA fuel injector for CAT E650 Technical information
- 0.875 in
- 13 Tooth Splined
- V2020
- 1 5/16 in
- 2.2
- Buna-N
- 2500
- 0.728 in
- SAE B, 2 Bolt
- Single Shaft Seal
- 16/32
- 2500
- 2500
- N/A
- 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
- 0.873 in
- 0.872 in
- 0.734 in
- 0.723 in
- N/A
- 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
- V2020-1F11S11S-11DD30
- 2500
- 2500
- 16.5
- 16.5
- N/A
- Outlet 90° CW from Inlet
- Outlet 90° CW from Inlet
- 3/4 in SAE O-Ring
- 3/4 in SAE O-Ring
- 2.2
S6B-TA fuel injector for CAT E650 Products and services
Hydraulic Pump Spare Parts piston shoe 708-3T-13312 for Komatsu PC70-8 | Cover End Flow @ RPM:35.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Minor Diameter [Max:Right Hand (CW); Port Orientation - Shaft End:V2020-1F11S11S-11DD30; Major Diameter [Max:2; Pilot Type:Flange; Rotation:N/A; Pressure Port Size, Cover End:N/A; Manufacturer Part No.:0.875 in; Shaft End Pressure [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S11S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.2; |
3306 fuel injector for CAT E235B/C/D | Major Diameter [Max:35.0 LB; Major Diameter [Min:Flange Mount; Max. RPM [Max:Right Hand (CW); Shaft Dia.:V2020-1F11S11S-11DD30; Relief Valve Setting:2; Minor Diameter:Flange; Pump Series:N/A; Mounting:N/A; Port Orientation - Cover End:0.875 in; Weight:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S11S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.2; |
H06CT-1 fuel injector for HITACHI EX270-2 | GPM @ 1,800 rpm, Cover End:35.0 LB; Manufacturer Part No.:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Minor Diameter [Max:V2020-1F11S11S-11DD30; Pressure Port Size, Cover End:2; Spline Description:Flange; Weight:N/A; Max. RPM [Max:N/A; Seal Material:0.875 in; Minor Diameter [Min:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S11S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.2; |
Factory price For For Kobelco SK120-2 excavator engine alternator generator | Pressure Port Size, Cover End:35.0 LB; Pilot Type:Flange Mount; Spline Description:Right Hand (CW); Integral Valve Configuration:V2020-1F11S11S-11DD30; Shaft Type:2; Displacement Cover End (cu in/revolution):Flange; GPM @ 1,800 rpm, Shaft End:N/A; Major Diameter [Min:N/A; Cover End Flow @ RPM:0.875 in; Max. RPM [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S11S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.2; |
4BG1 fuel injector for HITACHI EX120-5 | Shaft End RPM [Max:35.0 LB; Minor Diameter:Flange Mount; Spline Description:Right Hand (CW); Weight:V2020-1F11S11S-11DD30; Pressure Port Size, Shaft End:2; Major Diameter [Min:Flange; Model No.:N/A; Manufacturer Part No.:N/A; Rotation:0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S11S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.2; |
4D31T fuel injector for SUMITOMO SH145U | Shaft Dia.:35.0 LB; Shaft Length:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Shaft Type:V2020-1F11S11S-11DD30; Shaft Key:2; Mounting Flange:Flange; Cover End Flow @ RPM:N/A; Weight:N/A; Cover End Pressure [Max:0.875 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S11S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.2; |
Hydraulic Gear Pump 705-52-30260 | Weight:35.0 LB; Major Diameter [Min:Flange Mount; Shaft End RPM [Max:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:V2020-1F11S11S-11DD30; Pressure Port Size, Shaft End:2; Port Orientation - Cover End:Flange; Mounting:N/A; Shaft Key:N/A; Pump Series:0.875 in; Pilot Type:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S11S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.2; |
Hot Sale Kids Excavator for children play outdoor | Spline Description:35.0 LB; Port Orientation - Shaft End:Flange Mount; Major Diameter [Min:Right Hand (CW); Port Type:V2020-1F11S11S-11DD30; Mounting:2; Minor Diameter:Flange; Displacement Shaft End (cu in/revolution):N/A; Port Orientation - Cover End:N/A; Manufacturer Part No.:0.875 in; Shaft Dia.:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S11S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.2; |
Competitive price for Hitachi ZX200 excavator swing motor parts HMGE36EA PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT | Shaft End Pressure [Max:35.0 LB; Seal Material:Flange Mount; Shaft Seal Type:Right Hand (CW); Pump Series:V2020-1F11S11S-11DD30; Port Orientation - Shaft End:2; Cover End Flow @ RPM:Flange; Minor Diameter [Max:N/A; Port Size:N/A; Spline Description:0.875 in; Pressure Port Size, Shaft End:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S11S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.2; |
Hydraulic Pump Spare Parts Press Pin 708-2L-23360 for Komatsu PC200-7 | Minor Diameter:35.0 LB; Cover End Pressure [Max:Flange Mount; Shaft Key:Right Hand (CW); Port Type:V2020-1F11S11S-11DD30; Pressure Port Size, Shaft End:2; Shaft Seal Type:Flange; Relief Valve Setting:N/A; Rotation:N/A; GPM @ 1,800 rpm, Shaft End:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S11S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):2.2; |
S6B-TA fuel injector for CAT E650 Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
S6B-TA fuel injector for CAT E650 Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Hydraulic pump and pump parts CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump