Home>Products>Hydraulic pump and pump parts>B5.9-C fuel injector for hyundai R215-7C
B5.9-C fuel injector for hyundai R215-7C MODELS
Need a CAD or 3D Model?
B5.9-C fuel injector for hyundai R215-7C
category
Hydraulic pump and pump parts
B5.9-C fuel injector for hyundai R215-7C SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
B5.9-C fuel injector for hyundai R215-7C Technical information
- 1.25 in
- Straight w/ Key
- 3520V
- 2 7/8 in
- Buna-N
- 1800
- N/A
- SAE C, 2 Bolt
- Single Shaft Seal
- N/A
- 1800
- 1800
- N/A
- 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm
- N/A
- N/A
- N/A
- N/A
- N/A
- 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm
- 3520V25A5-1DB22R
- 3000
- 2500
- 7.5
- 37.5
- N/A
- Outlet 45° CCW from Inlet
- Outlet 90° CW from Inlet
- 3/4 in Code 61
- 1 1/4 in Code 61
- 1.1
- 4.9
B5.9-C fuel injector for hyundai R215-7C Products and services
gear oil pump 6128-52-1013 used for KOMATSU D155A-1 | Spline Description:75.0 LB; Major Diameter [Max:Flange Mount; Shaft Key:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:3520V25A5-1DB22R; Mounting:3; Relief Valve Setting:Flange; Displacement Shaft End (cu in/revolution):5/16 in; Weight:Standard Pilot; Manufacturer Part No.:1.25 in; Major Diameter [Min:Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A5-1DB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.9; |
excavator travel motor parts GM35VL for Nabtesco | Major Diameter [Max:75.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Seal Material:Right Hand (CW); Minor Diameter [Max:3520V25A5-1DB22R; Mounting Flange:3; Pressure Port Size, Shaft End:Flange; Rotation:5/16 in; Shaft End Flow @ RPM:Standard Pilot; Cover End Pressure [Max:1.25 in; Controlled Flow Rate:Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A5-1DB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.9; |
Hot sale Cart 330B turbocharger Part NO. 106-7407 turbocharger | Pressure Port Size, Cover End:75.0 LB; Cover End Flow @ RPM:Flange Mount; Mounting:Right Hand (CW); Pump Series:3520V25A5-1DB22R; Weight:3; Port Orientation - Shaft End:Flange; Spline Description:5/16 in; Pressure Port Size, Shaft End:Standard Pilot; Shaft Type:1.25 in; Shaft Length:Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A5-1DB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.9; |
High Quality Air Compressor 203-979-6580 for Komatsu Excavator PC60-7 PC100-6 | GPM @ 1,800 rpm, Shaft End:75.0 LB; Cover End Pressure [Max:Flange Mount; Rotation:Right Hand (CW); Port Orientation - Cover End:3520V25A5-1DB22R; Shaft Seal Type:3; Weight:Flange; Max. RPM [Max:5/16 in; Major Diameter [Max:Standard Pilot; Shaft End Flow @ RPM:1.25 in; Port Size:Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A5-1DB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.9; |
Excavator Kobelco SK200-8 slewing bearing ,slewing ring bearing | Cover End Flow @ RPM:75.0 LB; Cover End Pressure [Max:Flange Mount; Shaft Dia.:Right Hand (CW); Shaft Length:3520V25A5-1DB22R; Pump Series:3; Weight:Flange; Spline Description:5/16 in; Integral Valve Configuration:Standard Pilot; Seal Material:1.25 in; Displacement Shaft End (cu in/revolution):Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A5-1DB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.9; |
Hydraulic Pump Spare Parts Ball Guide 708-2L-23351 for Komatsu PC200-7 | GPM @ 1,800 rpm, Cover End:75.0 LB; Shaft End Pressure [Max:Flange Mount; Max. RPM [Max:Right Hand (CW); Shaft Seal Type:3520V25A5-1DB22R; Cover End RPM [Max:3; GPM @ 1,800 rpm, Shaft End:Flange; Shaft Key:5/16 in; Spline Description:Standard Pilot; Relief Valve Setting:1.25 in; Pilot Type:Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A5-1DB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.9; |
excavator S6D155 engine parts | Seal Material:75.0 LB; Cover End Pressure [Max:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Controlled Flow Rate:3520V25A5-1DB22R; Port Size:3; Shaft Key:Flange; Weight:5/16 in; Manufacturer Part No.:Standard Pilot; Spline Description:1.25 in; Integral Valve Configuration:Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A5-1DB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.9; |
3306 fuel injector for CAT E235B/C/D | GPM @ 1,800 rpm, Cover End:75.0 LB; Pilot Type:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Minor Diameter:3520V25A5-1DB22R; Rotation:3; Integral Valve Configuration:Flange; Max. RPM [Max:5/16 in; Pump Series:Standard Pilot; Mounting:1.25 in; Shaft End Flow @ RPM:Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A5-1DB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.9; |
High Quality Air Compressor 203-979-6580 for Komatsu Excavator PC450-6 | Weight:75.0 LB; Spline Description:Flange Mount; Max. RPM [Max:Right Hand (CW); Mounting:3520V25A5-1DB22R; Shaft Dia.:3; Shaft End RPM [Max:Flange; Mounting Flange:5/16 in; Cover End Pressure [Max:Standard Pilot; Shaft End Pressure [Max:1.25 in; Displacement Cover End (cu in/revolution):Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A5-1DB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.9; |
4BD1T fuel injector for kobelco SK120-3 | Relief Valve Setting:75.0 LB; Shaft End RPM [Max:Flange Mount; Spline Description:Right Hand (CW); Minor Diameter [Min:3520V25A5-1DB22R; Model No.:3; Shaft End Flow @ RPM:Flange; Shaft Key:5/16 in; Port Type:Standard Pilot; Port Orientation - Shaft End:1.25 in; Cover End Flow @ RPM:Straight w/ Key; Pump Series:3520V; Shaft Length:2 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A5-1DB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.9; |
B5.9-C fuel injector for hyundai R215-7C Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
B5.9-C fuel injector for hyundai R215-7C Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Hydraulic pump and pump parts CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump