Home>Products>Hydraulic pump and pump parts>Factory price PC200-6 6D95 excavator alternator engine generator 600-821-6190 0-33000-6580
Factory price PC200-6 6D95 excavator alternator engine generator 600-821-6190 0-33000-6580 MODELS
Need a CAD or 3D Model?
Factory price PC200-6 6D95 excavator alternator engine generator 600-821-6190 0-33000-6580
category
Hydraulic pump and pump parts
Factory price PC200-6 6D95 excavator alternator engine generator 600-821-6190 0-33000-6580 SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Factory price PC200-6 6D95 excavator alternator engine generator 600-821-6190 0-33000-6580 Technical information
- 1.09 in
- 13 Tooth Splined
- 2520V
- 1.75 in
- Buna-N
- 1800
- 0.7285 in
- SAE B, 2 Bolt
- Single Shaft Seal
- 16/32
- 1800
- 1800
- N/A
- 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm
- 0.873 in
- 0.872 in
- 0.734 in
- 0.723 in
- N/A
- 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
- 2520V21A14-11AB22R
- 3000
- 2500
- 21
- 31.5
- N/A
- Outlet 45° CCW from Inlet
- Outlet Opposite Inlet
- 3/4 in Code 61
- 1 in Code 61
- 2.8
- 4.1
Factory price PC200-6 6D95 excavator alternator engine generator 600-821-6190 0-33000-6580 Products and services
Fixed displacement piston pump A2F80R2P3 piston motor | Pressure Port Size, Shaft End:45.0 LB; Mounting:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Port Size:2520V21A14-11AB22R; Minor Diameter [Max:2 1/2; Shaft Type:Flange; Model No.:N/A; Manufacturer Part No.:Standard Pilot; Shaft Dia.:1.09 in; Weight:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11AB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1; |
gear pump 705-58-34010 used for KOMATSU PC300-1 | Shaft Type:45.0 LB; Port Orientation - Cover End:Flange Mount; Weight:Right Hand (CW); Shaft Key:2520V21A14-11AB22R; Displacement Cover End (cu in/revolution):2 1/2; Port Type:Flange; Pressure Port Size, Cover End:N/A; Shaft Seal Type:Standard Pilot; Pressure Port Size, Shaft End:1.09 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11AB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1; |
Hydraulic Pump Spare Parts Valve Plate 708-3S-13230 for Komatsu PC50MR-2 PC55MR-2 | Shaft End Flow @ RPM:45.0 LB; Weight:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Integral Valve Configuration:2520V21A14-11AB22R; GPM @ 1,800 rpm, Shaft End:2 1/2; Cover End RPM [Max:Flange; Cover End Flow @ RPM:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Shaft Dia.:1.09 in; Mounting:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11AB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1; |
spare parts for concrete pump for Sauer PV90R130 | Model No.:45.0 LB; Controlled Flow Rate:Flange Mount; Shaft Length:Right Hand (CW); Minor Diameter [Min:2520V21A14-11AB22R; Shaft Dia.:2 1/2; Port Orientation - Shaft End:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Minor Diameter:Standard Pilot; Pump Series:1.09 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11AB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1; |
Excavator Sumitomo SH60-1 slewing bearing ,slewing ring bearing | Minor Diameter [Max:45.0 LB; Shaft Seal Type:Flange Mount; Port Type:Right Hand (CW); Displacement Cover End (cu in/revolution):2520V21A14-11AB22R; Shaft End Pressure [Max:2 1/2; Model No.:Flange; Port Orientation - Cover End:N/A; Shaft End RPM [Max:Standard Pilot; Pressure Port Size, Cover End:1.09 in; Relief Valve Setting:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11AB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1; |
4TNV94 fuel injector for DOOSAN DH60-7 | Shaft Length:45.0 LB; Minor Diameter:Flange Mount; Shaft Type:Right Hand (CW); Displacement Cover End (cu in/revolution):2520V21A14-11AB22R; Rotation:2 1/2; Major Diameter [Max:Flange; Integral Valve Configuration:N/A; Shaft End RPM [Max:Standard Pilot; Relief Valve Setting:1.09 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11AB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1; |
Hydraulic Pump Spare Parts Retainer Plate 708-2G-13341 for Komatsu PC300-7 | Rotation:45.0 LB; Pressure Port Size, Shaft End:Flange Mount; Pilot Type:Right Hand (CW); Pump Series:2520V21A14-11AB22R; Max. RPM [Max:2 1/2; Integral Valve Configuration:Flange; Port Type:N/A; Port Size:Standard Pilot; Major Diameter [Max:1.09 in; Shaft Length:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11AB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1; |
Factory price S220 Exhaust muffler Excavator muffler Construction Machinery Parts Silencer | Weight:45.0 LB; Model No.:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Cover End Flow @ RPM:2520V21A14-11AB22R; Spline Description:2 1/2; Cover End RPM [Max:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Port Orientation - Shaft End:Standard Pilot; Shaft End Pressure [Max:1.09 in; Displacement Cover End (cu in/revolution):13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11AB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1; |
Factory price EX300-1 Exhaust muffler Excavator muffler Construction Machinery Parts Silencer | Shaft End Pressure [Max:45.0 LB; Mounting:Flange Mount; Weight:Right Hand (CW); Pressure Port Size, Shaft End:2520V21A14-11AB22R; Cover End Pressure [Max:2 1/2; Cover End Flow @ RPM:Flange; Mounting Flange:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Pressure Port Size, Cover End:1.09 in; Integral Valve Configuration:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11AB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1; |
Hydraulic Gear Pump 07438-72202 | Rotation:45.0 LB; Cover End Flow @ RPM:Flange Mount; Major Diameter [Max:Right Hand (CW); Shaft Seal Type:2520V21A14-11AB22R; Weight:2 1/2; Minor Diameter [Min:Flange; Shaft End RPM [Max:N/A; Minor Diameter:Standard Pilot; Seal Material:1.09 in; Shaft End Flow @ RPM:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11AB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1; |
Factory price PC200-6 6D95 excavator alternator engine generator 600-821-6190 0-33000-6580 Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
Factory price PC200-6 6D95 excavator alternator engine generator 600-821-6190 0-33000-6580 Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Hydraulic pump and pump parts CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump