• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>SWEDEN SKF Cylindrical Roller Bearings>Original SKF Cylindrical Roller Bearings NUP2315 E CX

  • Original SKF Cylindrical Roller Bearings NUP2315 E CX
  • Original SKF Cylindrical Roller Bearings NUP2315 E CX

Original SKF Cylindrical Roller Bearings NUP2315 E CX MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Original SKF Cylindrical Roller Bearings NUP2315 E CX

category

SWEDEN SKF Cylindrical Roller Bearings

Original SKF Cylindrical Roller Bearings NUP2315 E CX SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Original SKF Cylindrical Roller Bearings NUP2315 E CX Technical information

  • Open Circuit Axial
  • 1800 rpm
  • 11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm
  • 2 in 4-Bolt Flange/Code 61
  • 0.875 in
  • 7/8
  • Straight Keyed
  • 20 gpm @ 1800 rpm
  • 1 in 4-Bolt Flange/Code 61
  • Electric Motor Speeds
  • Pressure & Flow Compensator w/Plugged Orifice
  • 1 5/16 in
  • Side Port
  • Buna-N
  • 4 in
  • 20
  • SAE B, 2 Bolt
  • 5 3/4 in
  • Adjustable Maximum Displacement Stop & Single Shaft Seal
  • SAE B
  • 1200
  • N/A
  • 5000
  • 55 hp
  • PVM045ER05CS02AAC28110000A0A
  • Single Pump, Non-Thru-Drive
  • 2.75
  • 163
  • 11 Bar
  • 5000 psi
  • 4000
  • 4600
  • 280 Bar

Original SKF Cylindrical Roller Bearings NUP2315 E CX Products and services

 

Original SKF Cylindrical Roller Bearings NUP2232 ISOShaft Type:1/4 in; Minor Diameter [Min:Standard Blue Paint; Port Orientation - Cover End:Axial Piston Pumps; Port Orientation - Shaft End:PVM045; Controlled Flow Rate:52.0 LB; Pressure Port Size, Shaft End:Right Hand (CW); Relief Valve Setting:PVM045ER05CS02AAC28110000A0A; Weight:Flange Ports; Max. RPM [Max:Open Circuit Axial; Shaft Dia.:1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:0.875 in; Shaft Size:7/8; Shaft Type:Straight Keyed; GPM @ Speed:20 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1 5/16 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B; Input Torque [Max:1200; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER05CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;
Original SKF Cylindrical Roller Bearings NUP2320-E-TVP2 FAGGPM @ 1,800 rpm, Cover End:1/4 in; Controlled Flow Rate:Standard Blue Paint; Displacement Shaft End (cu in/revolution):Axial Piston Pumps; Pilot Type:PVM045; Shaft Dia.:52.0 LB; Spline Description:Right Hand (CW); Minor Diameter [Max:PVM045ER05CS02AAC28110000A0A; Minor Diameter [Min:Flange Ports; Major Diameter [Min:Open Circuit Axial; Major Diameter [Max:1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:0.875 in; Shaft Size:7/8; Shaft Type:Straight Keyed; GPM @ Speed:20 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1 5/16 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B; Input Torque [Max:1200; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER05CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;
Original SKF Cylindrical Roller Bearings NUP244 NTNPort Orientation - Shaft End:1/4 in; Shaft Key:Standard Blue Paint; Rotation:Axial Piston Pumps; Weight:PVM045; Pressure Port Size, Cover End:52.0 LB; Major Diameter [Max:Right Hand (CW); Port Size:PVM045ER05CS02AAC28110000A0A; Shaft Type:Flange Ports; Mounting:Open Circuit Axial; Max. RPM [Max:1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:0.875 in; Shaft Size:7/8; Shaft Type:Straight Keyed; GPM @ Speed:20 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1 5/16 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B; Input Torque [Max:1200; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER05CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;
Original SKF Cylindrical Roller Bearings NUP228-E-MPA NKEMinor Diameter [Max:1/4 in; Pressure Port Size, Cover End:Standard Blue Paint; Integral Valve Configuration:Axial Piston Pumps; Mounting:PVM045; Port Orientation - Cover End:52.0 LB; Model No.:Right Hand (CW); GPM @ 1,800 rpm, Cover End:PVM045ER05CS02AAC28110000A0A; Shaft Dia.:Flange Ports; Shaft Length:Open Circuit Axial; Shaft End Pressure [Max:1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:0.875 in; Shaft Size:7/8; Shaft Type:Straight Keyed; GPM @ Speed:20 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1 5/16 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B; Input Torque [Max:1200; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER05CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;
Original SKF Cylindrical Roller Bearings NUP2206-E-TVP2 FAGPressure Port Size, Shaft End:1/4 in; Integral Valve Configuration:Standard Blue Paint; Rotation:Axial Piston Pumps; Port Orientation - Cover End:PVM045; Mounting:52.0 LB; Max. RPM [Max:Right Hand (CW); Shaft End Pressure [Max:PVM045ER05CS02AAC28110000A0A; Port Orientation - Shaft End:Flange Ports; Shaft End RPM [Max:Open Circuit Axial; Shaft Seal Type:1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:0.875 in; Shaft Size:7/8; Shaft Type:Straight Keyed; GPM @ Speed:20 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1 5/16 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B; Input Torque [Max:1200; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER05CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;
Original SKF Cylindrical Roller Bearings NUP2204 KOYOSpline Description:1/4 in; Cover End Pressure [Max:Standard Blue Paint; Port Size:Axial Piston Pumps; Mounting Flange:PVM045; Displacement Shaft End (cu in/revolution):52.0 LB; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Pressure Port Size, Shaft End:PVM045ER05CS02AAC28110000A0A; Integral Valve Configuration:Flange Ports; Shaft End Pressure [Max:Open Circuit Axial; Port Type:1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:0.875 in; Shaft Size:7/8; Shaft Type:Straight Keyed; GPM @ Speed:20 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1 5/16 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B; Input Torque [Max:1200; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER05CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;
Original SKF Cylindrical Roller Bearings NUP244 E CXSeal Material:1/4 in; Cover End Pressure [Max:Standard Blue Paint; Major Diameter [Max:Axial Piston Pumps; Controlled Flow Rate:PVM045; Cover End Flow @ RPM:52.0 LB; Mounting:Right Hand (CW); Max. RPM [Max:PVM045ER05CS02AAC28110000A0A; GPM @ 1,800 rpm, Shaft End:Flange Ports; Port Type:Open Circuit Axial; Weight:1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:0.875 in; Shaft Size:7/8; Shaft Type:Straight Keyed; GPM @ Speed:20 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1 5/16 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B; Input Torque [Max:1200; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER05CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;
Original SKF Cylindrical Roller Bearings NUP226R KOYOMajor Diameter [Min:1/4 in; Pump Series:Standard Blue Paint; Rotation:Axial Piston Pumps; GPM @ 1,800 rpm, Cover End:PVM045; Mounting Flange:52.0 LB; Cover End Flow @ RPM:Right Hand (CW); Max. RPM [Max:PVM045ER05CS02AAC28110000A0A; Seal Material:Flange Ports; Manufacturer Part No.:Open Circuit Axial; Shaft Length:1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:0.875 in; Shaft Size:7/8; Shaft Type:Straight Keyed; GPM @ Speed:20 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1 5/16 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B; Input Torque [Max:1200; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER05CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;
Original SKF Cylindrical Roller Bearings NUP2330 ISOPort Orientation - Shaft End:1/4 in; Mounting Flange:Standard Blue Paint; Cover End RPM [Max:Axial Piston Pumps; Mounting:PVM045; Major Diameter [Max:52.0 LB; Port Size:Right Hand (CW); Rotation:PVM045ER05CS02AAC28110000A0A; Displacement Shaft End (cu in/revolution):Flange Ports; Shaft Key:Open Circuit Axial; Shaft End RPM [Max:1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:0.875 in; Shaft Size:7/8; Shaft Type:Straight Keyed; GPM @ Speed:20 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1 5/16 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B; Input Torque [Max:1200; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER05CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;
Original SKF Cylindrical Roller Bearings NUP2320-E-MA6 NKEManufacturer Part No.:1/4 in; Spline Description:Standard Blue Paint; Shaft Dia.:Axial Piston Pumps; Rotation:PVM045; Minor Diameter [Max:52.0 LB; Port Orientation - Cover End:Right Hand (CW); Shaft Length:PVM045ER05CS02AAC28110000A0A; Relief Valve Setting:Flange Ports; Port Size:Open Circuit Axial; Pilot Type:1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:0.875 in; Shaft Size:7/8; Shaft Type:Straight Keyed; GPM @ Speed:20 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1 5/16 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B; Input Torque [Max:1200; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER05CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;

 

 

Original SKF Cylindrical Roller Bearings NUP2315 E CX Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Original SKF Cylindrical Roller Bearings NUP2315 E CX Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

SWEDEN SKF Cylindrical Roller Bearings CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed Original SKF Cylindrical Roller Bearings NUP2315 E CX Also Viewed

  • Original SKF Cylindrical Roller Bearings NUP29/530 CX
  • Original SKF Cylindrical Roller Bearings NUP29/1060 PSL
  • Original SKF Cylindrical Roller Bearings NUP29/500 CX
  • Original SKF Cylindrical Roller Bearings NUP29/1060 CX
  • Original SKF Cylindrical Roller Bearings NUP29/500 ISO
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us